| 姓名 | 林燦榮 |
|---|---|
| 職稱 | 兼任教師 |
| 傳真 | (05)631-5310 |
| 電子郵件 | |
| 現職 | 機械與電腦輔助工程系教授 |
| 專長 | 潤滑、熱流、切削成型、電化學加工 |
| 開課名稱 | ◎工程數學 ◎品質管理 ◎逆向工程 ◎熱力學 ◎靜力學 ◎動力學 ◎磨潤學 ◎機構學 |
| 學歷 | 國立成功大學機械研究所碩士 |
| 經歷 | ◎國立雲林工專機械製造科講師 ◎國立虎尾技術學院機械製造工程系副教授 ◎機械與電腦輔助工程系教授 |
| 年度 | 論文名稱 |
|---|---|
| 2022 | Tsann-Rong Lin and Chin-Ru Su, Experimental study of lapping and electropolishing of tungsten carbides, International Journal of Advanced Manufacturing Technology, 2008 (SCI), Jan. 2022 |
| 2022 | Tsann-Rong Lin, An analytical model of the material removal rate between elastic and elastic-plastic deformation for a polishing process, International Journal of Advanced Manufacturing Technology, 32, 675-681, 2007 (SCI), Jan. 2022 |
| 2022 | Tsann-Rong Lin, A comparative study between smaller-the-better and normal-the-best quality characteristics when lapping ceramic blocks, The International Journal and Advanced Manufacturing Technology, 2006 (SCI), Jan. 2022 |
| 2022 | Tsann-Rong Lin, An analytical model of the material removal rate between elastic and elastic-plastic deformation for a polishing process, The International Journal and Advanced Manufacturing Technology, 2006 (SCI), Jan. 2022 |
| 2022 | Ming-Fong Huang, Tsann-Rong Lin and Huan-Chung Chiu, Effect of machining characteristics on polishing ceramic blocks, Int. J. Adv. Manuf. Technol., 26, 999- 1005, 2005 (SCI), Jan. 2022 |
| 2022 | Huan-Chung Chiu and Tsann-Rong Lin, A novel reverse measurement and manufacturing of conjugate cams in a diesel engine, Int. J. Adv. Manuf. Technol., 26, 41- 46, 2005 (SCI), Jan. 2022 |
| 2022 | M. F. Huang and T. R. Lin,Application of Grey-Taguchi method to optimise drilling of aluminium alloy 6061 with multiple performance characteristics,Materials Science and Technology,Volume 20,pp. pp. 528-532,(2004)(SCI;), Jan. 2022 |
| 2022 | Tsann-Rong Lin, 2003, “ Optimization of removal rate and weibull modulus in polishing of ceramic blocks using the fuzzy-based Taguchi method”, Materials and manufacturingprocesses, vol.18, no. 2, pp.229-243., Jan. 2022 |
| 2022 | Tsann-Rong Lin, ”The use of Reliability in the Taguchi method for the optimization of the polishing ceramic gauge block”, submitted in the international Journal of advanced manufacturing Technology, Jan. 2022 |
| 2022 | K.Y. Chang, Y. H. Song, T. R. Lin, 2002 “Analysis on lapping and polishing of Gauge Block”, accepted in the International Journal of advanced manufacturing Technology., Jan. 2022 |
| 2022 | Tsann-Rong Lin, 2002 “Cutting behavior of a TiN-coated carbide drill with curved cutting edges during high-speed machining of stainless steel,” accepted in the Journal of Material processing Technology., Jan. 2022 |
| 2022 | Tsann-Rong Lin,2002 ” Experimental design and performance analysis of TiN-coated carbide tool in face milling stainless steel,” accepted in the Journal of materials processing Technology., Jan. 2022 |
| 2022 | Tsann-Rong Lin,2002 ”Cutting behavior through variable feed and variable speed when drilling stainless steel with TiN-coated carbide drills”, accepted in the International Journal of advanced manufacturing Technology., Jan. 2022 |
| 2022 | Tsann-Rong Lin,1998,”Reliability and failure of face milling tools when cutting stainless steel” Journal of Materials processing Technology,vol.79, pp.41-46.of advanced manufacturing Technology., Jan. 2022 |
| 2022 | Tsann-Rong Lin,1996,”The effects of three dimensional irregularities on the performance characterisitics of turbulent journal bearings”, Wear,vol.196, pp.126-132., Jan. 2022 |
| 2022 | Tsann-Rong Lin,1996,”hydrodynamic ludrication of journal bearings including micropolar lubricants and three dimensional irregularities”, Wear,vol.192, pp.21-28., Jan. 2022 |
| 2022 | Tsann-Rong Lin,1994,”Steady state performance of finite hydrodynamic journal bearing with three dimensional irregularitirs”, Wear,vol.176, pp.95-102., Jan. 2022 |
| 2022 | Tsann-Rong Lin,1994,”Analysis of a misaligned journal bearing for micropolar fluid considering cavitation and starvation effects”Journal of chinese institute of engineers,vol.17,no.1, pp.31-41., Jan. 2022 |
| 2022 | Tsann-Rong Lin,1993,”Analysis of film rupture and reformation boundaries in finite journal bearing with micropolar fluids”, Wear,vol.161, pp.145-153., Jan. 2022 |
| 2022 | Tsann-Rong Lin,1992,”Thermal Elastohydrodynamic lubeication of rolling and sliding contacts with a power law fluid”, Wear,vol.154, pp.77-93., Jan. 2022 |
| 2022 | Tsann-Rong Lin,Jen-Fin Lin,1991,”Thermal effects in Elastohydrodynamic lubrication of line contacts using a non-Newtonian lubricant”,Tribology International, December, vol.24,no.6, pp.365-372., Jan. 2022 |
| 2022 | Tsann-Rong Lin, Jen-Fin Lin,1991,”Compressible Elastohydrodynamic lubrication of rolling and sliding contacts with a power law fluid”,Wear,vol.142,no.2, pp.315-330., Jan. 2022 |
| 2022 | Tsann-Rong Lin, Jen-Fin Lin 1990, “The Elastohydrodynamic lubrication of line contacts with pseudoplastic fluids”,Wear, vol.140, pp.235-249., Jan. 2022 |
| 2022 | Jen-Fin Lin, Tsann-Rong Lin, Jiin-yuh Jang 1989, “Elastohydrodynamic lubrication of line contacts with a non-Newtonian lubricant”, Tribology International, October, vol.22,no.5, pp.335-342., Jan. 2022 |
| 2022 | Tsann-Rong Lin, Jen-Fin Lin, Jiin-Yuh Jang 1989, “Thermal effects in Elastohydrodynamic lubrication of line contacts”, J. of the C.S.M.E.,vol.10,no.4,pp.303- 310., Jan. 2022 |
| 2022 | Jen-Fin Lin, Tsann-Rong Lin, Jiih-Yuh Jang 1988, “The Elastohydrodynamic lubrication of line contacts with Non-Newtonian lubricant”, J. of the C.S.M.E., vol.9, no. 5, pp. 311- 320., Jan. 2022 |
| 年度 | 論文名稱 |
|---|---|
| 2022 | 林燦榮：碳化鎢鑽頭高速切削不銹鋼材刀具磨潤問題之研究。, Jan. 2022 |
| 2022 | 林燦榮：變進給率及變切削速度對於鑽削不銹鋼磨潤性能研究。, Jan. 2022 |
| 2022 | 林燦榮：面銑削不銹鋼材刀具壽命曲線分佈之分析。, Jan. 2022 |
| 2022 | 林燦榮：表面塗層之鑽頭鑽削不銹鋼之磨潤性能研究。, Jan. 2022 |
| 2022 | 林燦榮：不銹鋼材加工時刀具磨潤問題之研究。, Jan. 2022 |
| 年度 | 書名 |
|---|---|
| 2022 | (三)技術報告, Jan. 2022 |
| 2022 | (二)專書, Jan. 2022 |
| 2022 | (一)學位論文, Jan. 2022 |
| 年度 | 計畫名稱 | 計畫期間 |
|---|---|---|
| 2022 | 曾經與之重要研究計畫 /計畫名稱：機械與電化學複合研磨拋光性能之研究 /執行期間：2007/8/1-2008/7/31 /金額(萬)：6 | 2022.01 ~ 迄今 |
| 2022 | 曾經與之重要研究計畫 /計畫名稱：模糊田口方法於陶瓷規拋光最佳化之研究 /執行期間：2001/8/1-2002/7/31 /金額(萬)：3.327 | 2022.01 ~ 迄今 |
| 2022 | 曾經與之重要研究計畫 /計畫名稱：精密塊規研磨與拋光磨耗行為之分析 /執行期間：2001/8/1-2002/7/31 /金額(萬)：2.397 | 2022.01 ~ 迄今 |