| 姓名 | 林忠志 |
|---|---|
| 職稱 | 教授 |
| 電話 | (05)631-5321 |
| 分機 | 5321 |
| 傳真 | (05)631-5310 |
| 電子郵件 | |
| 辦公室 | C01 |
| 實驗室 | 高分子加工研究室 |
| 現職 | 機械與電腦輔助工程系 教授 |
| 專長 | 塑膠產品設計、精密射出成型、精密模具設計 |
| 開課名稱 | ◎工程數學 ◎動力學 ◎電腦輔助模流分析 ◎材料力學 ◎材料實驗 ◎塑膠模具設計與分析 ◎塑膠加工學 ◎模具學 ◎進階電腦輔助模具設計 |
| 學歷 | 國立中正大學機械工程研究所博士 |
| 經歷 | ◎財團法人塑膠工業技術發展中心 產品開發部/工程師、組長、副理 85.11~99.01 ◎國立虎尾科技大學 產學處 智財技轉組組長 ◎國立虎尾科技大學 機械與電腦輔助工程系 系主任 107.08~110.07 ◎國立虎尾科技大學 機械與電腦輔助工程系 校務發展中心 主任 110.08~112.07 ◎國立虎尾科技大學 機械與電腦輔助工程系 教務處副教務長兼任跨域學程辦公室執行長、雙語教學資源中心主任 112.08~114.07 ◎國立虎尾科技大學 機械與電腦輔助工程系 副教授 102.02~110.01 ◎國立虎尾科技大學 機械與電腦輔助工程系 教授 110.02~迄今 |
| 橫幅圖片 |  |
| 年度 | 論文名稱 |
|---|---|
| 2024 | Chung Chih Lin, Hong Xuan Lin. Injection molding for hollow products with a varying cross-sectional contour by using ice core technology. Materials Today Communications 2024, 38, 108258; DOI: 10.1016/j.mtcomm.2024.108258, Jan. 2024 |
| 2022 | Chung-Chih Lin, Chao-Long Yang. A Water-Soluble Core for Manufacturing Hollow Injection-Molded Products. Polymers 2022, 14(11), 2185; DOI: 10.3390/polym14112185, Jan. 2022 |
| 2022 | Chung-Chih Lin, Tian-Cheng Wu,Yu-Shiang Chen and Bo-Yu Yang. A Semi-Analytical Method for Designing a Runner System of a Multi-Cavity Mold for Injection Molding. Polymers 2022, 14(24), 5442 ; DOI: 10.3390/polym14245442, Jan. 2022 |
| 2021 | Chih-Wei Tseng, Yu-Hsi Hsieh, Chung-Chih Lin, Malcolm Koo & Felix W. Leung. Heat sink effect of underwater polypectomy in a porcine colon model. BMC Gastroenterol 21(1):406; DOI: 10.1186/s12876-021-01985-1, Jan. 2021 |
| 2020 | Chung-Chih Lin, Kun-Chen Chen and Hon-Chih Yeh. Influence of Heat Sink on the Mold Temperature of Gypsum Mold Used in Injection Molding. Polymers 2020, 12, 701; DOI: 10.3390/polym12030701, Jan. 2020 |
| 2020 | Chung-Chih Lin, Kun-Chen Chen and Hon-Chih Yeh. Influence of Heat Sink on the Mold Temperature of Gypsum Mold Used in Injection Molding. Polymers 2020, 12, 701, doi:0.3390/polym12030701 (SCI 2019 IF=3.426, Rank 16/89, Q1), Jan. 2020 |
| 2018 | Chung-Chih Lin, Guo-how Lee & Yu-Jen Wang. Design and Fabrication of Gypsum Mold for Injection Molding. Journal of the Chinese Institute of Engineers 2018, 41(2) 160-167; DOI: 10.1080/02533839.2018.1437366, Jan. 2018 |
| 2018 | Chung-Chih Lin, Guo-how Lee & Yu-Jen Wang. Design and Fabrication of Gypsum Mold for Injection Molding. Journal of the Chinese Institute of Engineers 2018, 41:2 160-167, doi: 10.1080/02533839.2018.1437366 (SCI 2019 IF=0.667, Rank 81/91, Q4), Jan. 2018 |
| 2017 | Lin, C.-C., Lee, B.-Y., Chen, J.-Y., Lee, G.-H. Design and fabrication of injection mold using gypsum. AIP Conference Proceedings 2017 Conference paper DOI: 10.1063/1.5016777, Jan. 2017 |
| 2017 | 林忠志、吳睿哲，溶芯射出成形之研究，2017尖端材料科技協會季刊 No.48， 8 pages, 2017年, Jan. 2017 |
| 2015 | Yu-Jen Wang, Chung-De Chen, Chung-Chih Lin and Jui-Hsin Yu. A Nonlinear Suspended Energy Harvester for a Tire Pressure Monitoring System. Micromachines 2015, 6, 312-327, DOI: 10.3390/mi6030312, Jan. 2015 |
| 2015 | Chung-Chih Lin and Chieh-Liang Wu. Monitoring polymer melt rheology during injection molding. SPE Plastics Research Online, 2015, 2 pages, 327-339, doi: 10.2417/spepro.005938, Jan. 2015 |
| 2015 | Yu-Jen Wang, Chung-De Chen, Chung-Chih Lin and Jui-Hsin Yu. A Nonlinear Suspended Energy Harvester for a Tire Pressure Monitoring System. Micromachines 2015, 6, 312-327, doi:10.3390/mi6030312 (SCI 2019 IF=2.523, Rank 23/64, Q2), Jan. 2015 |
| 2014 | Chung-Chih Lin and Chieh-Liang Wu. Study Molded Part Quality of Plastic Injection Process by Melt Viscosity Evaluation. Advances in Material Research, 2014, 3: 2, 327-339, doi: 10.12989/amr.2014.3.2.327, Jan. 2014 |
| 2012 | Lin, C.-C., Shie, J.-Y., Peng, H.-S. Study of the injection molding technology for the non-circular lens. Annual Technical Conference - ANTEC, Conference Proceedings 2012, 2, 1632-1637, Jan. 2012 |
| 2012 | Lin, C.-C. Influence of injection velocity and joint geometry on quality of insert molding. Polymer Engineering and Science 2012, 52(2) 268-276, DOI: 10.1002/pen.22080, Jan. 2012 |
| 2011 | Lin, C.C., Shie, J.Y., Lin, W.H., Yeh, R.Y. A study of injection molding of the barrel for the optical lenses. Annual Technical Conference - ANTEC, Conference Proceedings 2011, 2, 1743-1746, Jan. 2011 |
| 2010 | Kuo, C.-C., Liu, C.-C., Jeng, Y.-F., Lin, C.-C., Liou, Y.-Y., He, J.-L. Thickness dependence of optoelectrical properties of Mo-doped in 2 O 3 films deposited on polyethersulfone substrates by ion-beam-assisted evaporation. Journal of Nanomaterials, 2010 DOI: 10.1155/2010/840316, Jan. 2010 |
| 2010 | Lin, C.C., Kuo, C.C. The Optimization for Design of the Parameters of Spiral Baffle. Advanced Materials Research, 2010 136, 103-107 DOI: 10.4028/www.scientific.net/AMR.136.103, Jan. 2010 |
| 2010 | Lin, C.C. An impedance approach to the design of optimal actuator location for acoustic response synthesis. Smart Materials and Structures 2010, 19(5) DOI: 10.1088/0964-1726/19/5/055021, Jan. 2010 |
| 2010 | C. C. Lin*, C. C. Kuo, “The optimization for design of the parameters of spiral baffle”, Advanced Materials Research, 136, pp.103-107, 2010. (EI), Jan. 2010 |
| 2010 | C. C. Kuo, C. C. Liu, Y. F. Jeng, C. C. Lin, Y. Y. Liou, J. L. He, ”Thickness dependence of optoelectrical properties of Mo-doped In2O3 films deposited on polyethersulfone substrates by ion-beam-assisted Evaporation, Journal of Nanomaterials, 2010, 840316 (8pp), 2010. (SCI, IF=1.376, Rank=104/231), Jan. 2010 |
| 2009 | Liu, C.-C.; Liang, Y.-C.; Kuo, C.-C.; Liou, Y.-L.; Chen, J.-W.; Lin, C.-C. Fabrication and opto-electric properties of ITO/ZnO bilayer films on polyethersulfone substrates by ion beam-assisted evaporation. Solar Energy Materials and Solar Cells 2009, 93(2), 267-272, Jan. 2009 |
| 2009 | C. C. Liu, Y. C. Liang, C.C. Kuo, Y.Y. Liou, J.W. Chen, C.C. Lin “Fabrication and opto-electric properties of ITO/ZnO bilayer films on polyethersulfone substrates by ion beam assisted evaporation” Solar Energy Materials and Solar Cells, 93, pp.267–272, 2009. (SCI, IF=4.542, Rank=26/231), Jan. 2009 |
| 2008 | Kuo, C.C.; Liu, C.C.; Lin, C.C.; Liou, Y.Y.; He, J.L.; Chen, F.S. Effects of oxygen gas flow rate and ion beam plasma conditions on the opto-electronic properties of indium molybdenum oxide films fabricated by ion beam-assisted evaporation. Thin Solid Films 2008, 516(16) 5612-5617 DOI: 10.1016/j.tsf.2007.07.111, Jan. 2008 |
| 2008 | Kuo, C.C.; Liu, C.C.; Lin, C.C.; Liou, Y.Y.; Lan, Y.F.; He, J.L. Effects of oxygen flow rate on microstructure and properties of indium molybdenum oxide films by ion beam-assisted deposition. Journal of Vibration and Acoustics 2008, 82(5) 441-447 DOI: 10.1016/j.vacuum.2007.07.060, Jan. 2008 |
| 2008 | C. C. Lin, C. C. Cheng, Acoustic response synthesis using multiple induced-strain actuators, Journal of Vibration and Acoustics 2008, 130(1) DOI: 10.1115/1.2345670, Jan. 2008 |
| 2008 | C. C. Kuo, C. C. Liu, C. C. Lin, Y. Y. Liou, J. L. He, F. S. Chen, “Effects of oxygen gas flow rate and ion beam plasma conditions on the opto-electronic properties of indium molybdenum oxide films fabricated by ion beam assisted evaporation”, Thin solid film, 516, pp.5612-5617, 2008. (SCI, IF=1.890, Rank=4/18), Jan. 2008 |
| 2008 | C. C. Kuo, C. C. Liu, C. C. Lin, Y. Y. Liou, J. L. He, F. S. Chen, “Effects of oxygen flow rate on microstructure and properties of indium molybdenum oxide films by ion beam assisted deposition”, Vacuum, 82, pp.441-447, 2008. (SCI, IF=1.317, Rank=105/231), Jan. 2008 |
| 2008 | C. C. Lin, C. C. Cheng, “Acoustic response synthesis using multiple induced strain actuators, Jan. 2008 |
| 2005 | Lin, Y.-T.; Lin, C.-C.; Xie, F.-Y. The analysis of the optimal parameter design of LED Light Guide Panel's part. he analysis of the optimal parameter design of LED Light Guide Panel's part. Annual Technical Conference - ANTEC, Conference Proceedings. 2005, 3, 64-68, Jan. 2005 |
| 2005 | C.C. Cheng, C.C. Lin. An impedance approach for vibration response synthesis using multiple PZT actuators. Sensors and Actuators A: Physical 2005, 118(1) 116-126 DOI: 10.1088/0964-1726/14/6/004, Jan. 2005 |
| 2005 | Cheng, C.C.; Lin, C.C. An impedance approach for determining optimal locations and shapes of multiple induced strain actuators. Smart Materials and Structures 2005 , 14(6) 1120-1126 DOI: 10.1016/j.tsf.2007.07.111, Jan. 2005 |
| 2005 | C. C. Cheng and C. C. Lin, “An Impedance Approach for Vibration Response Synthesis Using Multiple PZT Actuators”, Sensors and Actuators A. 118, pp.116-126, 2005. (SCI, IF=1.802, Rank=12/58), Jan. 2005 |
| 2005 | C. C. Cheng and C. C. Lin, “An Impedance Approach for Determining Optimal Locations and Shapes of Multiple Induced Strain Actuators,” Smart Materials and Structures, 14, pp.1120-1126, 2005. (SCI, IF=2.080, Rank=8/58), Jan. 2005 |
| 年度 | 論文名稱 |
|---|---|
| 2022 | 張怡哲、陳浩瑋、林忠志*，“全電式射出成形機射出計量與射出速度之關係探討與研究＂，中華民國第三十五屆高分子學術研討會，台灣桃園，中原大學，論文編號：OH4-002，2012, Jan. 2022 |
| 2022 | 林忠志*、楊鋒文 ＂射出成形流道對於黏度的影響研究＂，2012精密機械與製造科技研討會，墾丁 台灣，論文編號：I010，2012。, Jan. 2022 |
| 2022 | 林忠志、李國豪、葉豪雄、李雅萱、徐杰安、劉嘉琛，石膏模仁應用在射出成型可行性之研究，2016 高分子年會，國立成功大學，台南市，2016 年 1 月 29 - 30 日, Jan. 2022 |
| 2022 | 袁偉哲、林忠志、高健瑋，懸臂樑位移變形分析與補償設計，中華民國力學學會第四十三屆全國力學會議，逢甲大學，臺中市，2019年11月29-30日。, Jan. 2022 |
| 2022 | 林忠志、林俞湘、陳坤成，以阻抗法進行模具溫度分析，中國機械工程學會第36屆學術研討會，國立臺灣師範大學，臺北市，2019年12月7-8日。, Jan. 2022 |
| 2022 | 彭玟寧、林忠志，自行車花鼓機構結分析，中國機械工程學會第36屆全國學術研討會，國立臺灣師範大學，臺北市，2019年12月7-8日。, Jan. 2022 |
| 2022 | C. C. Kuo, C. C. Lin, J. L. He, C. C. Liu, Y. Y. Liou, F. S. Chen, “Effects of oxygen flow rate on the optoelectric properties of Indium molybdenum oxide films fabricated by ion beam assisted evaporation”, 2006 International Symposium on Nano Science and Technology, P.P. 236-239, November, Southern Taiwan University of Technology, Taiwan., Jan. 2022 |
| 2022 | C. C. Kuo, C. C. Liu, C. C. Lin, Y. Y. Liou, J. L. He, F. S. Chen, “Effects of oxygen gas flow rate and ion beam plasma conditions on the opto-electronic properties of indium molybdenum oxide films fabricated by ion beam assisted evaporation”, The 3rd International Conference on Technological Advances of Thin Films & Surface Coatings, December, Singapore, 2006., Jan. 2022 |
| 2022 | C. C. Lin*, J.Y. Shie, H. S. Peng, “Study of the Injection Molding Technology for the Non-circular Len “, ANTEC, Orlando USA, 2012., Jan. 2022 |
| 2022 | C. C. Lin*, J.Y. Shie, W.H. Lin, R. Y Yeh, “A Study of Injection Molding of the Barrel for the Optical Lenses “, ANTEC, Boston USA, 2011., Jan. 2022 |
| 2022 | Chung-Chih Lin, Wen-Teng Wang, Chin-Chiuan Kuo, Chieh-Liang Wu. Experimental and Theoretical Study of Melt Viscosity in Injection Process, International Conference on Mechanical, Mechatronics and Manufacturing Engineering (ICMMME 2014), Jan. 2022 |
| 2022 | Chung-Chih Lin and Chien-Liang Wu, Online Monitoring Rheological Property of Polymer Melt during Injection Molding, International Conference on Materials, Mechanical and Industrial Engineering ( ICMMIE 2015 ), Jan. 2022 |
| 2022 | Chung-Chih Lin, Bean-Yin Lee, Jenn-Yih Chen and Guo-How Lee, Design and Fabrication of Injection Mold Using Gypsum, International Conference of the Polymer Processing Society (PPS-2016), Jan. 2022 |
| 年度 | 計畫名稱 | 計畫期間 |
|---|---|---|
| 2022 | 科技部計畫-102年 射出產品品質穩定性之研究(66.9萬元) | 2022.01 ~ 迄今 |
| 2022 | 科技部計畫-103年 非全周接觸共押吹薄膜黏著強度之研究(68萬元) | 2022.01 ~ 迄今 |
| 2022 | 科技部計畫-105年發明專利申請維護及推廣計畫 (180萬元) | 2022.01 ~ 迄今 |
| 2022 | 科技部計畫-105年石膏在射出模具之應用研究 (74.2萬元) | 2022.01 ~ 迄今 |
| 2022 | 科技部計畫-106年發明專利申請維護及推廣計畫(200萬元) | 2022.01 ~ 迄今 |
| 2022 | 科技部計畫-109年水溶芯射出成型技術研究開發(62.2萬元) | 2022.01 ~ 迄今 |
| 發表日期 | 專利名稱 |
|---|---|
| 2022/01/01 | 密閉系統主動式散熱裝置 /專利號碼：M375981 (中華民國) |
| 2022/01/01 | 多頻吸振裝置 /專利號碼：I269002 (中華民國) |
| 2022/01/01 | 汽車曲軸扭轉吸振器 /專利號碼：I300112 (中華民國) |
| 2022/01/01 | 預觸式加熱模溫裝置 /專利號碼：I335863 (中華民國) |
| 年度 | 獎項名稱 | 頒獎單位 |
|---|---|---|
| 2022 | 81年 中國工程師學會工程學生論文比賽優等獎 | |
| 2022 | 95年 財團法人塑膠工業技術發展中心研究論文獎 | |
| 2022 | 97年 財團法人塑膠工業技術發展中心創新研究獎 |
| 年度 | 名稱 | 發表日期 | 全部作者 |
|---|---|---|---|
| 2022 | 102年 毛巾織機紗送經機構設計與分析((20萬元 偉榮棉織) | 2022-01-01 | |
| 2022 | 102年虎尾毛巾聚落競爭力提生輔導計畫(14.4萬元 偉榮棉織+旻寬) | 2022-01-01 | |
| 2022 | 103年 雲林縣產業優化創新加值(14.4萬元 偉榮棉織+元棉織) | 2022-01-01 | |
| 2022 | 104年 中小企業創新育成中心計畫 (300萬元 經濟部中小企業處) | 2022-01-01 | |
| 2022 | 104年 中小型工具機產業及技術應用服務(14.4萬元 主賀+滿億電機) | 2022-01-01 | |
| 2022 | 105年 精密模具技術運用在PP夾鏈袋量測技術 (30萬元 漢昱塑膠) | 2022-01-01 | |
| 2022 | 105年工 具機產業鏈生產力4.0技術提升與應用服務 (14.4萬元 主賀+漢昱) | 2022-01-01 | |
| 2022 | 105年 手堆車底座強度分析(1.2萬元，取德) | 2022-01-01 | |
| 2022 | 106年射出型技術顧問輔導與訓練(1.62萬元，大立光電福委會) | 2022-01-01 | |
| 2022 | 106年一體式離合器軸承強度分析(10萬元，台灣嘉利傳動) | 2022-01-01 | |
| 2022 | 106年 工具磨床機械設計人才培育計畫(30萬元，鼎維) | 2022-01-01 | |
| 2022 | 108年 花鼓零件強度結構分析(5.98萬元，昱泓) | 2022-01-01 | |
| 2022 | 107年 學界關懷計畫-工具機及其應用之技術輔導(26.4萬元，金屬中心) | 2022-01-01 | |
| 2022 | 108年 學界關懷計畫-智動化在產業機械的應用技術輔導(26.4萬元，金屬中心) | 2022-01-01 | |
| 2022 | 109年 學界關懷計畫-推動模具產業鏈邁向智慧製造 (26.4萬元，金屬中心) | 2022-01-01 |