| 姓名 | 李宜勲 |
|---|---|
| 職稱 | 助理教授 |
| 電話 | (05)631-5327 |
| 傳真 | (05)631-5310 |
| 電子郵件 | |
| 辦公室 | C07 |
| 現職 | 機械與電腦輔助工程系 助理教授 |
| 專長 | 非傳統加工技術、產品開發與設計 |
| 開課名稱 | ◎焊接工程 ◎靜力學 ◎圖控語言 ◎智慧機器人理論與應用 |
| 經歷 | ◎虎尾科技大學 機械與電腦輔助工程系 助理教授 115.02~迄今 ◎亞東科技大學 機械工程系 助理教授 ◎國家中山科學研究院 系統工程師 ◎光寶科技股份有限公司 主任工程師 ◎士林電機廠股份有限公司 資深專員 |
| 橫幅圖片 |  |
| 國家 | 學校名稱 | 系所 | 學位 |
|---|---|---|---|
| 國立中央大學 | 機械工程學系 | 博士 |
| 年度 | 論文名稱 |
|---|---|
| 2026 | Sung-Lin Tsai , Yi-Hsun Lee , Jiunn-Jye Wey , Szu-Chia Lai , Yu-Yin Huang , Chun-Hong Chen , Shih-Hung Lin, Bondless and solventless fabrication based on assembly method for an electrochemical microfluidic device, Chinese Journal of Physics, Aug. 2026 |
| 2017 | Z. You, S. Yang, C. Yu, Y. Lee, and S. Yang, Design of a High Starting Torque Single-Phase DC-Excited Flux Switching Machine, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, pp. 9905-9913, Apr. 2017 |
| 2017 | Z. You, S. Yang, C. Yu, Y. Lee, and S. Yang, Design of a High Starting Torque Single-Phase DC-Excited Flux Switching Machine, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 64(12) ,(2017),pages 9905-9913 (SCI, Impact factor 7.5), Jan. 2017 |
| 2015 | Yi-Hsun Lee, Kun-Ling Wu, Chung-Ting Bai. Chen-Yuan Liao and Biing-Hwa Yan. Planetary motion combined with two-dimensional vibration-assisted magnetic abrasive Finishing, The International Journal of Advanced Manufacturing Technology .Vol 76,pages 1865-1877,(2015).(SCI, Impact factor 2.9), Jan. 2015 |
| 2014 | Yi-Hsun Lee, Kun-Ling Wu, Chung-Ting Bai. Chen-Yuan Liao and Biing-Hwa Yan., Planetary motion combined with two-dimensional vibration-assisted magnetic abrasive Finishing, The International Journal of Advanced Manufacturing Technology, pp. 1865-1877, Sep. 2014 |
| 2013 | Yi-Hsun Lee, Kun-Ling Wu, Jhan-Huang Jhou, Yung-Hsing Tsai and Biing-Hwa Yan, Two-dimensional vibration-assisted magnetic abrasive finishing of stainless steel SUS304, The International Journal of Advanced Manufacturing Technology, pp. 2723-2733, Aug. 2013 |
| 2013 | Yi-Hsun Lee, Kun-Ling Wu, Jhan-Huang Jhou, Yung-Hsing Tsai and Biing-Hwa Yan. Two-dimensional vibration-assisted magnetic abrasive finishing of stainless steel SUS304, The International Journal of Advanced Manufacturing Technology, Vol 69,pages 2723-2733, (2013).(SCI, Impact factor 2.9), Jan. 2013 |
| 2005 | C. Hsieh, Y. Lee, Applied visible/near-infrared spectroscopy on detecting the sugar content and hardness of pearl guava., Applied Engineering in Agriculture, pp. 1039-1046, Dec. 2005 |
| 2005 | C. Hsieh, Y. Lee and F. Huang, Measurement of Crispness of Pearl Guava by Visible/NIR Spectroscopy, International Agricultural Engineering Journal, pp. 137-146, Oct. 2005 |
| 2005 | C. Hsieh, Y. Lee and F. Huang, Measurement of crispness of pearl guava by visible/NIR spectroscopy, International Agricultural Engineering Journal 114(3) (2005) 137-146. (EI, Impact factor 0.23), Jan. 2005 |
| 2005 | C. Hsieh, Y. Lee, APPLIED VISIBLE/NEAR-INFRARED SPECTROSCOPY ON DETECTING THE SUGAR CONTENT AND HARDNESS OF PEARL GUAVA, Applied Engineering in Agriculture, 21 (6) (2005) 1039-1046. (SCI Impact factor 0.9), Jan. 2005 |
| 年度 | 論文名稱 |
|---|---|
| 2025 | 李宜勲、蔡永興、葉金璋, 基於拋光墊之磁力輔助拋光裝置開發, 中華民國力學學會年會暨第四十九屆全國力學會議, Nov. 20-21, 2025, TWN臺灣 |
| 2025 | Sung-Lin Tsai, Yi-Hsun Lee, Jiunn-Jye Wey, Szu-Chia Lai, Yu-Yin Huang, Chun-Hong Chen, Shih-Hung Lin, Electrochemical microfluidic chip fabrication using a bondless and solventless method., 2025 6th International Conference on Engineering, Physics, MEMS-Biosensors and Applications (ICEBA2025), Nov. 09-11, 2025, TWN臺灣 |
| 2024 | Sung-Lin Tsai , Chiao-Jou Chang , Yi-Hsun Lee , Chun-Hong Chen , Liang-Yo Tu, Cost-Effective Manufacturing Technique for Microfluidic Chips Designed for Portable Microplastic Monitoring, 中華民國航太學會學術研討會, Dec. 06, 2024, TWN臺灣 |
| 2017 | Shih-Chin Yang, Sheng-Ming Yang, Zih-Cing You, Yao-Yang Tsai and Yi-Hsun Lee, Position Estimation Capability on Saliency-Based Sensorless Drive of Permanent Magnet Machine using Different Injection Signals, 2017 IEEE International Electric Machines & Drives Conference (IEMDC 2017), May. 20-23, 2017, USA美國 |
| 2011 | 李宜勳、吳坤齡、蔡永興、白崇廷、顏炳華, 應用二維振動輔助可撓式磁力拋光工具於SUS304不鏽鋼之研究, 中國機械工程學會第二十八屆全國學術研討會,(2011), Dec. 09-10, 2011, TWN臺灣 |
| 2010 | 周展煌、李宜勳、蔡永興、顏炳華、黃豐元, 二維振動輔助磁力研磨之設備開發與其應用, 中國機械工程學會第27屆全國學術研討會, Dec. 09-10, 2010, TWN臺灣 |
| 2004 | Ching-Lu Hsieh, Yi-Xun Lee., Apply visible/near-infrared spectroscopy to detect sugar content and hardness for pearl cultivar guava., Proceedings of The 2nd International Symposium on Bio-systems Engineering., Sep. 20-22, 2004, JPN日本 |
| 2004 | 李宜勲、黃富星、謝清祿, 珍珠拔番石柳三種脆度模式之建立, 2004生機與農機論文發表會, Aug. 25, 2004, TWN臺灣 |
| 2024 | Sung-Lin Tsai, Chiao-Jou Chang, Yi-Hsun Lee, Chun-Hong Chen and Liang-Yo Tu. Cost-Effective Manufacturing Technique for Microfluidic Chips Designed for Portable Microplastic Monitoring, 中華民國航太學會學術研討會,(2024), Jan. 2024 |
| 2017 | Shih-Chin Yang, Sheng-Ming Yang, Zih-Cing You, Yao-Yang Tsai and Yi-Hsun Lee. Position Estimation Capability on Saliency-Based Sensorless Drive of Permanent Magnet Machine using Different Injection Signals, 2017 IEEE International Electric Machines and Drives Conference (IEMDC) DOI: 10.1109/IEMDC.2017.8002241.(Conference), Jan. 2017 |
| 2011 | 應用二維振動輔助可撓式磁力拋光工具於SUS304不鏽鋼之研究,中國機械工程學會第二十八屆全國學術研討會,(2011), Jan. 2011 |
| 2010 | 二維振動輔助磁力研磨之設備開發與其應用,中國機械工程學會第二十七屆全國學術研討會,(2010), Jan. 2010 |
| 2004 | Apply visible/near-infrared spectroscopy to detect sugar content and hardness for pearl cultivar guava. Proceedings of The 2nd International Symposium on Bio-systems Engineering. September 21-23, 2004 Kobe, Japan, Jan. 2004 |
| 2003 | 可見光及近紅外線光譜於蕃石榴糖度檢測之研究 ,九十二年農機與生機論文發表會, Jan. 2003 |
| 發表日期 | 專利名稱 |
|---|---|
| 2016/01/01 | 2016 發明專利: “絕緣套管與繞線製品” I606672 |
| 2014/01/01 | 2014 新型專利: “扣合裝置” M492038 |
| 2014/01/01 | 2014 新型專利: “旋鈕帽蓋及具有該旋鈕帽蓋的電子裝置” M490649 |
| 2010/01/01 | 2010 新式樣專利: “馬達驅動器(三)” D132906 |
| 2010/01/01 | 2010 新式樣專利: “馬達驅動器(二)” D133553 |
| 2010/01/01 | 2010 新式樣專利: “馬達驅動器(一)” D133553 |
| 服務名稱 | 服務性質 | 服務單位 | 參與情形 | 地點 | 服務起始日 | 服務結束日 |
|---|---|---|---|---|---|---|
| 後補理事 | 擔任學會行政職務 | 財團法人台灣電加工學會 | 2027-02-28 | 2027-03-01 |
| 證照名稱 | 發照單位 |
|---|---|
| 遙控無人機普通操作證 | 交通部民用航空局 |
| 銑床-CNC銑床 | 勞動部 |
| 課程名稱 | 上課班級 | 參考連結 |
|---|---|---|
| 數控工具機實習 | 四機電輔系三攜 | https://tqas.nfu.edu.tw/course_schedule/detail/11517695 |
| 焊接工程 | 夜四機電輔二乙 | https://tqas.nfu.edu.tw/course_schedule/detail/11517675 |
| 圖控程式語言設計 | 四機電輔系二攜 | https://tqas.nfu.edu.tw/course_schedule/detail/11517662 |
| 智慧機器人理論與應用 | 四機電輔三甲 | https://tqas.nfu.edu.tw/course_schedule/detail/11512547 |
| 數控工具機實習 | 四機電輔三甲 | https://tqas.nfu.edu.tw/course_schedule/detail/11512538 |