| 1 |
期刊論文 |
Jen-Fin Lin, Tsann-Rong Lin, Jiih-Yuh Jang 1988, “The Elastohydrodynamic lubrication of line contacts with Non-Newtonian lubricant”, J. of the C.S.M.E., vol.9, no. 5, pp. 311- 320. |
| 2 |
期刊論文 |
Tsann-Rong Lin, Jen-Fin Lin, Jiin-Yuh Jang 1989, “Thermal effects in Elastohydrodynamic lubrication of line contacts”, J. of the C.S.M.E.,vol.10,no.4,pp.303- 310. |
| 3 |
期刊論文 |
Jen-Fin Lin, Tsann-Rong Lin, Jiin-yuh Jang 1989, “Elastohydrodynamic lubrication of line contacts with a non-Newtonian lubricant”, Tribology International, October, vol.22,no.5, pp.335-342. |
| 4 |
期刊論文 |
Tsann-Rong Lin, Jen-Fin Lin 1990, “The Elastohydrodynamic lubrication of line contacts with pseudoplastic fluids”,Wear, vol.140, pp.235-249. |
| 5 |
期刊論文 |
Tsann-Rong Lin, Jen-Fin Lin,1991,”Compressible Elastohydrodynamic lubrication of rolling and sliding contacts with a power law fluid”,Wear,vol.142,no.2, pp.315-330. |
| 6 |
期刊論文 |
Tsann-Rong Lin,Jen-Fin Lin,1991,”Thermal effects in Elastohydrodynamic lubrication of line contacts using a non-Newtonian lubricant”,Tribology International, December, vol.24,no.6, pp.365-372. |
| 7 |
期刊論文 |
Tsann-Rong Lin,1992,”Thermal Elastohydrodynamic lubeication of rolling and sliding contacts with a power law fluid”, Wear,vol.154, pp.77-93. |
| 8 |
期刊論文 |
Tsann-Rong Lin,1993,”Analysis of film rupture and reformation boundaries in finite journal bearing with micropolar fluids”, Wear,vol.161, pp.145-153. |
| 9 |
期刊論文 |
Tsann-Rong Lin,1994,”Analysis of a misaligned journal bearing for micropolar fluid considering cavitation and starvation effects”Journal of chinese institute of engineers,vol.17,no.1, pp.31-41. |
| 10 |
期刊論文 |
Tsann-Rong Lin,1994,”Steady state performance of finite hydrodynamic journal bearing with three dimensional irregularitirs”, Wear,vol.176, pp.95-102. |
| 11 |
期刊論文 |
Tsann-Rong Lin,1996,”hydrodynamic ludrication of journal bearings including micropolar lubricants and three dimensional irregularities”, Wear,vol.192, pp.21-28. |
| 12 |
期刊論文 |
Tsann-Rong Lin,1996,”The effects of three dimensional irregularities on the performance characterisitics of turbulent journal bearings”, Wear,vol.196, pp.126-132. |
| 13 |
期刊論文 |
Tsann-Rong Lin,1998,”Reliability and failure of face milling tools when cutting stainless steel” Journal of Materials processing Technology,vol.79, pp.41-46.of advanced manufacturing Technology. |
| 14 |
期刊論文 |
Tsann-Rong Lin,2002 ”Cutting behavior through variable feed and variable speed when drilling stainless steel with TiN-coated carbide drills”, accepted in the International Journal of advanced manufacturing Technology. |
| 15 |
期刊論文 |
Tsann-Rong Lin,2002 ” Experimental design and performance analysis of TiN-coated carbide tool in face milling stainless steel,” accepted in the Journal of materials processing Technology. |
| 16 |
期刊論文 |
Tsann-Rong Lin, 2002 “Cutting behavior of a TiN-coated carbide drill with curved cutting edges during high-speed machining of stainless steel,” accepted in the Journal of Material processing Technology. |
| 17 |
期刊論文 |
K.Y. Chang, Y. H. Song, T. R. Lin, 2002 “Analysis on lapping and polishing of Gauge Block”, accepted in the International Journal of advanced manufacturing Technology. |
| 18 |
期刊論文 |
Tsann-Rong Lin, ”The use of Reliability in the Taguchi method for the optimization of the polishing ceramic gauge block”, submitted in the international Journal of advanced manufacturing Technology |
| 19 |
期刊論文 |
Tsann-Rong Lin, 2003, “ Optimization of removal rate and weibull modulus in polishing of ceramic blocks using the fuzzy-based Taguchi method”, Materials and manufacturingprocesses, vol.18, no. 2, pp.229-243. |
| 20 |
期刊論文 |
M. F. Huang and T. R. Lin,Application of Grey-Taguchi method to optimise drilling of aluminium alloy 6061 with multiple performance characteristics,Materials Science and Technology,Volume 20,pp. pp. 528-532,(2004)(SCI;) |
