| 1 |
期刊論文 |
Tarng, Y. S., and Lee, B. Y.,1992,“Use of Model-Based Cutting Simulation System for Tools Breakage Monitoring in Milling,” International Journal of Machine Tools & Manufacture, Vol.32/5, PP.641-649. |
| 2 |
期刊論文 |
Tarng, Y. S., and Lee, B. Y., 1993, “A sensor for the Detection of Tool Breakage in NC Milling,” Journal of Materials Processing Technology, Vol.36, pp.259-272. |
| 3 |
期刊論文 |
Lee, B. Y., and Tarng, Y.S., 1994,“Prediction of Specific Cutting Force and Cutting Force Ratio in Turning,” Journal of Materials Processing Technology, Vol.41, pp. 71-82. |
| 4 |
期刊論文 |
Tarng, Y.S., Young, H.T., and Lee, B.Y., 1994, “An Analytical Model of Chatter Vibration in Metal Cutting,” International Journal of Machine Tools & Manufacture, Vol. 34/2, pp. 183-197. |
| 5 |
期刊論文 |
Tarng, Y.S., Wang, T.C., Chen, W.N., and Lee, B. Y., 1995,“The Use of Neural Networks in Predicting Turning Forces,” Journal of Materials Processing Technology, Vol. 47,pp. 273-289. |
| 6 |
期刊論文 |
Tarng, Y.S., Shyur, Y.Y., and Lee, B.Y., 1995, “Computer-Aided Generation of the Cutting Conditions in Pocket Machining,” Journal of Materials Processing Technology. Vol.51, pp. 223-234. |
| 7 |
期刊論文 |
Lee,B.Y., Tarng, Y.S., and Ma,S.C., 1995 “Modeling of the process Damping Force in Chatter Vibration,” International Journal of Machine Tools & Manufacture, Vol. 35/7, pp. 951-962.(86年甲種獎助代表作) |
| 8 |
期刊論文 |
Liu, H.S., Lee, B.Y., and Tarng, Y.S., 1996. “Monitoring of Drill Fracture from the Current Measurement of A Three-Phase Induction Motor, ”International Journal of Machine Tools & Manufacture, Vol. 36/6, pp. 729-738. |
| 9 |
期刊論文 |
Lee,B.Y., Liu, H.S., and Tarng, Y.S., 1997,“Monitoring of Tool Fracture in End Milling Using Induction Motor Current ,”Journal of Materials Processing Technology, Vol.70, pp. 279-284.(87年甲種獎助代表作) |
| 10 |
期刊論文 |
Lee,B.Y., Liu,H.S., and Tarng,Y.S.,1998,“Modeling and Optimization of Drilling Process”, Journal of Materials Processing Technology Vol.74, pp.149-157. |
| 11 |
期刊論文 |
Lee,B.Y., Liu, H.S., and Tarng Y.S., 1999, “An Abductive Network for Predicting Tool Life in Drilling, ”IEEE Transactions on Industry Applications, Vol. 35, NO.1, pp. 190- 195. |
| 12 |
期刊論文 |
Lee, B. Y., and Tarng,Y.S.,1999,“Application of the Discrete Wavelet Transform to the Monitoring of Tool Failure in End Milling Using the Spindle Motor Current”, International Journal of Advanced Manufacturing Technology, Vol.15,pp.238-243. |
| 13 |
期刊論文 |
Lee,B.Y. and Tarng,Y.S., 1999,“Milling Cutter Breakage Detection by the Discrete Wavelet Transform”, Mechatronics, Vol. 9,pp.225- 234. (89年甲種獎助代表作) |
| 14 |
期刊論文 |
Tarng,Y.S. and Lee, B. Y.,1999,“Amplitude Demodulation of the Induction Motor Current for the Tool Breakage Detection in Drilling Operations”, Robotics and Computer Integrated Manufacturing ,Vol. 15,pp.313-318. |
| 15 |
期刊論文 |
Lee, B. Y. and Tarng,Y.S., 2000,“ Drill Fracture Detection by the Discrete Wavelet Transform ”, Journal of Materials Processing Technology, Vol.99,pp.250-254. |
| 16 |
期刊論文 |
Liu, H. S., Lee, B.Y., and Tarng, Y.S.,2000,“In-Process Prediction of Corner Wear in Drilling Operations”, Journal of Materials Processing Technology,Vol.101,pp.152-158. |
| 17 |
期刊論文 |
Lee, B.Y. and Tarng,Y.S., 2000,“Cutting Parameter Selection for Maximizing Production Rate or Minimizing Production Cost in Multistage Turning Operations,” Journal of Materials Processing Technology,Vol.105,pp.61-66. |
| 18 |
期刊論文 |
Lee, B. Y., Tarng, Y. S., and Lii, H. R.,2000,“An Investigation of Modeling of the Machining Database in Turing Operations,” Journal of Materials Processing Technology,Vol.105,pp.1-6 |
| 19 |
期刊論文 |
Yu,S.F. and Lee ,B.Y. ,Lin,W.S.,2001,”Waveform Monitoring of Electric Discharge Machining by Wavelet Transform,” International Journal of Advanced Manufacturing Technology,Vol.17,pp.339-343. |
| 20 |
期刊論文 |
Lin,W. S., Lee ,B.Y. and Wu,C. L.,2001, “Modeling the Surface Roughness and Cutting Force for Turning,” Journal of Materials Processing Technology,Vol.108,pp286-293. |
