| 1 |
曾參與之重要研究計畫 |
曾經與之重要研究計畫 /計畫名稱：機械與電化學複合研磨拋光性能之研究 /執行期間：2007/8/1-2008/7/31 /金額(萬)：6 |
2022-01-01 |
| 2 |
曾參與之重要研究計畫 |
曾經與之重要研究計畫 /計畫名稱：模糊田口方法於陶瓷規拋光最佳化之研究 /執行期間：2001/8/1-2002/7/31 /金額(萬)：3.327 |
2022-01-01 |
| 3 |
曾參與之重要研究計畫 |
曾經與之重要研究計畫 /計畫名稱：精密塊規研磨與拋光磨耗行為之分析 /執行期間：2001/8/1-2002/7/31 /金額(萬)：2.397 |
2022-01-01 |
| 4 |
發表專書 |
(三)技術報告 |
2022-01-01 |
| 5 |
發表專書 |
(二)專書 |
2022-01-01 |
| 6 |
發表專書 |
(一)學位論文 |
2022-01-01 |
| 7 |
研討會論文 |
林燦榮：碳化鎢鑽頭高速切削不銹鋼材刀具磨潤問題之研究。 |
2022-01-01 |
| 8 |
研討會論文 |
林燦榮：變進給率及變切削速度對於鑽削不銹鋼磨潤性能研究。 |
2022-01-01 |
| 9 |
研討會論文 |
林燦榮：面銑削不銹鋼材刀具壽命曲線分佈之分析。 |
2022-01-01 |
| 10 |
研討會論文 |
林燦榮：表面塗層之鑽頭鑽削不銹鋼之磨潤性能研究。 |
2022-01-01 |
| 11 |
研討會論文 |
林燦榮：不銹鋼材加工時刀具磨潤問題之研究。 |
2022-01-01 |
| 12 |
期刊論文 |
Tsann-Rong Lin and Chin-Ru Su, Experimental study of lapping and electropolishing of tungsten carbides, International Journal of Advanced Manufacturing Technology, 2008 (SCI) |
2022-01-01 |
| 13 |
期刊論文 |
Tsann-Rong Lin, An analytical model of the material removal rate between elastic and elastic-plastic deformation for a polishing process, International Journal of Advanced Manufacturing Technology, 32, 675-681, 2007 (SCI) |
2022-01-01 |
| 14 |
期刊論文 |
Tsann-Rong Lin, A comparative study between smaller-the-better and normal-the-best quality characteristics when lapping ceramic blocks, The International Journal and Advanced Manufacturing Technology, 2006 (SCI) |
2022-01-01 |
| 15 |
期刊論文 |
Tsann-Rong Lin, An analytical model of the material removal rate between elastic and elastic-plastic deformation for a polishing process, The International Journal and Advanced Manufacturing Technology, 2006 (SCI) |
2022-01-01 |
| 16 |
期刊論文 |
Ming-Fong Huang, Tsann-Rong Lin and Huan-Chung Chiu, Effect of machining characteristics on polishing ceramic blocks, Int. J. Adv. Manuf. Technol., 26, 999- 1005, 2005 (SCI) |
2022-01-01 |
| 17 |
期刊論文 |
Huan-Chung Chiu and Tsann-Rong Lin, A novel reverse measurement and manufacturing of conjugate cams in a diesel engine, Int. J. Adv. Manuf. Technol., 26, 41- 46, 2005 (SCI) |
2022-01-01 |
| 18 |
期刊論文 |
M. F. Huang and T. R. Lin,Application of Grey-Taguchi method to optimise drilling of aluminium alloy 6061 with multiple performance characteristics,Materials Science and Technology,Volume 20,pp. pp. 528-532,(2004)(SCI;) |
2022-01-01 |
| 19 |
期刊論文 |
Tsann-Rong Lin, 2003, “ Optimization of removal rate and weibull modulus in polishing of ceramic blocks using the fuzzy-based Taguchi method”, Materials and manufacturingprocesses, vol.18, no. 2, pp.229-243. |
2022-01-01 |
| 20 |
期刊論文 |
Tsann-Rong Lin, ”The use of Reliability in the Taguchi method for the optimization of the polishing ceramic gauge block”, submitted in the international Journal of advanced manufacturing Technology |
2022-01-01 |
