1 |
研討會論文 |
陳立緯、葉晟廷,伺服沖床沖頭磨耗回饋分析研究,第36屆中國機械工程研討會,2019年12月,台灣台北。 |
2022-01-01 |
2 |
曾參與之重要研究計畫 |
年度:105 /委託單位:XX公司/計畫名稱:切削液循環系統及排水流道設計先期評估 /執行期間: 105/11/01 ~ 106/01/31 |
2022-01-01 |
3 |
期刊論文 |
Li-Wei Chen, Jian-Ming Huang and Yuan-Chuan Hsu, Investigation of the Clinching Process Combines with Hot Stamping Process for High-Strength Steel Sheets, MATEC Web of Conferences, 21, (2015). (EI) |
2022-01-01 |
4 |
研討會論文 |
陳立緯、林庭緯,熱沖壓模具鍍層磨耗測試設備之設計與開發,第35屆中國機械工程研討會,2018年12月,台灣嘉義。 |
2022-01-01 |
5 |
曾參與之重要研究計畫 |
年度:105 /委託單位:XX公司 /計畫名稱:天線外殼之設計分析與製造 /執行期間:105/06/01~105/08/31 |
2022-01-01 |
6 |
期刊論文 |
L. Chen, Q. Wang and Y. Zhang, Flow Characterisation of Diffusion Flame under Non-Resonant Acoustic Excitation, Experimental Thermal and Fluid Science, 45, (2013), 227-233. (SCI) |
2022-01-01 |
7 |
研討會論文 |
陳立緯、曹智皓,高斷面差自行車異形管液壓成之製程設計與分析,第五屆台灣塑性加工研討會,2018年11月,台灣雲林。 |
2022-01-01 |
8 |
曾參與之重要研究計畫 |
年度:105 /委託單位:XX公司/計畫名稱:自行車高深寬比鋁合金輪圈擠製及輥彎製程模擬分析與成形製程最佳化研究/執行期間: 105/05/01 ~ 105/11/30 |
2022-01-01 |
9 |
期刊論文 |
L. Chen, Q. Wang and Y. Zhang, Flow Characterisation of Diffusion Flame in a Standing Wave, Experimental Thermal and Fluid Science, 41, (2012), 84-93. (SCI) |
2022-01-01 |
10 |
研討會論文 |
Li-Wei Chen, and Bo-Ting Ye, Design and Simulation of Preforming Process of Hydroforming for the High Expansion Ratio Bike Tube, The 3th International Conference on Precision Machinery and Manufacturing Technology,2018, Auckland, New Zealand. |
2022-01-01 |
11 |
曾參與之重要研究計畫 |
年度:104 /委託單位:XX公司 /計畫名稱:金屬浮動球閥球體元作成形最佳化分析及製程改善分析導入 /執行期間:104/10/01~105/09/30 |
2022-01-01 |
12 |
期刊論文 |
Q. Wang, H.Gohari Darabkhani, L. Chen and Y. Zhang, Vortex Dynamics and Structures of Methane/air Coflow Diffusion Flames, Experimental Thermal Fluid Science, 37, (2012), 84-90.(SCI) |
2022-01-01 |
13 |
研討會論文 |
凃君翰、陳立緯,降伏準則及硬化準則對汽車鋁合金板件成形分析之影響,第34屆中國機械工程研討會,2017年12月,台灣台中。 |
2022-01-01 |
14 |
曾參與之重要研究計畫 |
年度:104 /委託單位:XX公司/計畫名稱:金屬板金成形分析及設計開發人才培育計畫/執行期間: 104/10/01 ~ 105/09/30 |
2022-01-01 |
15 |
期刊論文 |
H. Gohari Darabkhani, Q. Wang, L. Chen, Y. Zhang, Impact of Co-Flow Air on Buoyant Diffusion Flames Flicker, Energy Conversion and Management, Vol. 52, (2011), 2996-3003. (SCI) |
2022-01-01 |
16 |
研討會論文 |
張祐泰、鍾嘉毫、陳立緯,汽車鋁合金葉子板之引伸成形性分析,第四屆台灣塑性加工研討會,2017年11月,台灣台中。 |
2022-01-01 |
17 |
曾參與之重要研究計畫 |
年度:104 /委託單位:XX公司 /計畫名稱:整線自動化沖床進料設備與電腦整合製造管理系統計畫 /執行期間:104/08/01~105/07/31 |
2022-01-01 |
18 |
期刊論文 |
Cherng-Yuan Lin and Li-Wei Chen, Comparison of Fuel Properties and Emission Characteristic of Two-and Three-Phase Emulsions Prepared by Ultrasonically Vibrating and Mechanically Homogenizing Emulsification Methods, Fuel, Vol. 87, (2008), 2154-2161. (SCI) |
2022-01-01 |
19 |
研討會論文 |
Li-Wei Chen, Yu-Chi Chou, Analysis of the cooling system for hot stamping die using CFD software, 2017 Global Conference on Engineering and Applied Science,2017, Okinawa, Japan. |
2022-01-01 |
20 |
曾參與之重要研究計畫 |
年度:104 /委託單位:科技部 /計畫名稱:整線自動化沖床進料設備與電腦整合製造管理系統計畫 /執行期間:104/08/01 ~ 105/07/31 |
2022-01-01 |