| Name | HSIEH,CHIU-FAN |
|---|---|
| Job Title | Professor |
| Tel | +886-5-631-5316 |
| Fax | +886-5-631-5310 |
| Job | Professor, Department of Mechanical and Computer-Aided Engineering |
| Expertise | Gear/Mechanism/Machine Design, Fluid Machinery, Computational Mechanics, Reverse Engineering, Human Biomechanical Engineering |
| Courses | ◎Mechanical Design Practice and Applications ◎Creative Engineering Design ◎Mechanical Design |
| Education | 中正大學 機械工程研究所 博士 |
| Experience | ◎Postdoctoral Researcher, Department of Mechanical Engineering, National Cheng Kung University, Aug. 2006 ~ Jul. 2007 ◎Executive Supervisor, Alumni Association, National Chung Cheng University, Dec. 2006 ~ Present ◎Associate Professor, Department of Mechanical and Computer-Aided Engineering, National Formosa University (NFU), Aug. 2010 ~ Jan. 2016 ◎Professor, Department of Mechanical and Computer-Aided Engineering, National Formosa University (NFU), Feb. 2016 ~ Present |
| Banner |  |
- Degrees
- Journal Paper
- Conference Paper
- Project
- Patent
- Honor
- Thesis Guidance
- Volunteer Service
- Student Project Competition
- Courses
| Country | School Name | Department | Degree |
|---|---|---|---|
| 國立中正大學 | 機械工程學系 | 碩士 | |
| 國立高雄應用科技大學 | 機械工程系 | 學士 | |
| 國立中正大學 | 機械工程學系 | 博士 |
| Year | Paper Title |
|---|---|
| 2025 | Influence of Span Angle Variations on Fluid Flow Characteristics in Gerotor Screw Vacuum Pumps, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Dec. 2025 |
| 2023 | Design Challenges in Hydrogen-Fueled Rotary Engine—A Review, Energies, Jan. 2023 |
| 2022 | Flow Characteristics of Gerotor Motors with Pin and Nonpin Designs, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Aug. 2022 |
| 2022 | Flow characteristics of gerotor vacuum pumps with multistage designs, Vacuum, Feb. 2022 |
| 2022 | Hsieh, C. F., & Cheng, H. Y. (2015). Effects of Various Geometric Designs on the Flow Characteristics of a Triangular Rotary Engine. Mechanical Engineering Research, 5(1), 1-11 (11 pages), Jan. 2022 |
| 2022 | Hsieh, C. F., & Zhu, Y. Q. (2015). The Influence of Design Parameters on Straight Bevel Gear Dynamics. Mechanical Engineering Research, 5(2), 114-124 (11 pages), Jan. 2022 |
| 2022 | Hsieh, C. F., Lin, W. H., & Chen, J. S. (2015). Biomechanics analysis of the arm for the badminton forehand smash. Chinese Journal of Sports Biomechanics, 12(2), 45-58 (14 pages), Jan. 2022 |
| 2022 | Hsieh, C. F., & Zhou, Q. J. (2015). Fluid analysis of cylindrical and screw type Roots vacuum pumps. Vacuum, 121, 274-282. (9 pages)(SCI), Jan. 2022 |
| 2022 | Hsieh, C. F., & Deng, Y. C. (2015). A design method for improving the flow characteristics of a multistage Roots pumps. Vacuum, 121, 217-222. (6 pages)(SCI), Jan. 2022 |
| 2022 | Hsieh, C. F., & Jian, W. S. (2016). The effect on dynamics of using various transmission designs for two-stage cycloidal speed reducers. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230(4), 665-681. (17 pages) (SCI), Jan. 2022 |
| 2021 | Fluid flow characteristics of two types rotary engines, International Journal of Hydrogen Energy, Nov. 2021 |
| 2019 | Performance prediction method of cycloidal speed reducers , Journal of the Brazilian Society of Mechanical Sciences and Engineering, Mar. 2019 |
| 2018 | Dynamics Analysis of the Triangular Rotary Engine Structures, JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, Nov. 2018 |
| 2016 | The effect on dynamics of using various transmission designs for two-stage cycloidal speed reducers, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Mar. 2016 |
| 2015 | The Influence of Design Parameters on Straight Bevel Gear Dynamics, Mechanical Engineering Research, Nov. 2015 |
| 2015 | A design method for improving the flow characteristics of a multistage Roots pumps, VACUUM, Nov. 2015 |
| 2015 | Fluid analysis of cylindrical and screw type Roots vacuum pumps, VACUUM, Nov. 2015 |
| 2015 | Biomechanics analysis of the arm for the badminton forehand smash, Chinese Journal of Sports Biomechanics, Oct. 2015 |
| 2015 | Flow characteristics of Roots pumps with multistage designs by CFD investigation, Mechanics & Industry, Aug. 2015 |
| 2015 | A new curve for application to the rotor profile of rotary lobe pumps, Mechanism and Machine Theory, May. 2015 |
| 2015 | Flow Characteristics of Gerotor Pumps with Novel Variable Clearance Designs, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Apr. 2015 |
| 2015 | Traditional versus improved designs for cycloidal speed reducers with a small tooth difference：The effect on dynamics, Mechanism and Machine Theory, Apr. 2015 |
| 2015 | Effects of Various Geometric Designs on the Flow Characteristics of a Triangular Rotary Engine, Mechanical Engineering Research, Jan. 2015 |
| 2015 | Traditional versus improved designs for cycloidal speed reducers with a small tooth difference: The effect on dynamics, Mechanism and Machine Theory, pp. 15-35, 2015 |
| 2015 | Predicting the biomechanics effects on the human arm of the badminton forehand smash, 2015 IFToMM World Congress Proceedings, IFToMM 2015, 2015 |
| 2015 | Influence of seat height and crank rotation speed on biomechanics of cyclist's leg bones, 2015 IFToMM World Congress Proceedings, IFToMM 2015, 2015 |
| 2014 | The effect on dynamics of using a new transmission design for eccentric speed reducers, Mechanism and Machine Theory, Oct. 2014 |
| 2014 | Dynamics analysis of cycloidal speed reducers with pinwheel and nonpinwheel designs, Journal of Mechanical Design, Transaction of the ASME, Sep. 2014 |
| 2012 | Fluid and Dynamics Analyses of a Gerotor Pump Using Various Span Angle Designs, ASME Transaction, Journal of Mechanical Design, Dec. 2012 |
| 2010 | Non-Undercutting Region and Property Evaluation of Epitrochoidal Gerotor Geometry, Proceedings of the Intitution of Mechanical Engineers , Part C ：Journal of Mechanical Engineering Science, Feb. 2010 |
| 2009 | Influence of gerotor performance in varied geometrical design parameters, ASME Transaction, Journal of Mechanical Design, Dec. 2009 |
| 2009 | A Study of the geometric design and gas port of the claw-type rotor, Proc. IMechE, Part C: J. Mechanical Engineering Science, Sep. 2009 |
| 2009 | The static rigidity analysis of the position adjustable computer table, Materials Science Forum, Jan. 2009 |
| 2008 | Study on the Tooth Profile for the Screw Claw-Type Pump, Mech. Mach. Theory, Nov. 2008 |
| 2008 | Feasible Design Region and Sealing Property of Hypotrochoidal Gerotor Geometry, Proc. IMechE, Part C: J. Mechanical Engineering Science, Sep. 2008 |
| 2008 | Tooth Profile of a Roots Rotor with a Variable Trochoid Ratio, Mathematical and Computer Modeling, Sep. 2008 |
| 2007 | Geometric Design for a Gerotor Pump with High Area Efficiency, ASME Transaction,Journal of Mechanical Design, Dec. 2007 |
| 2007 | Study on The High-Sealing of Roots Rotor with Variable Trochoid Ratio, ASME Transaction,Journal of Mechanical Design, Dec. 2007 |
| 2007 | Geometric Design Using Hypotrochoid and Non-undercutting Conditions for an Internal Gear, ASME Transaction,Journal of Mechanical Design, Apr. 2007 |
| 2007 | Determination of Surface Singularities of a Cycloidal Gear Drive with Inner Meshing, Mathematical and Computer Modeling, Feb. 2007 |
| 2006 | Study on High Volumetric Efficiency of the Roots Rotor Profile with Variable Trochoid Ratio, Proc. IMechE, Part C: J. Mechanical Engineering Science, Sep. 2006 |
| 2006 | Geometry Design and Analysis for Trochoidal-Type Speed Reducers: with Conjugate Envelopes, Transactions of the Canadian Society for Mechanical Engineering, Feb. 2006 |
| Year | Paper Title |
|---|---|
| 2024 | 謝秋帆, 莊耀文, 張天立, 轉速對兩角轉子壓縮機之流場影響, 中國機械工程學會第四十一屆全國學術研討會, Nov. 15-16, 2024, TWN臺灣 |
| 2024 | 謝秋帆,沈哲宇, 張天立, 齒形與殼厚設計對諧波減速機之動態影響, 第 27 屆全國機構與機器設計學術研討會, Nov. 08-09, 2024, TWN臺灣 |
| 2024 | Chiu-Fan Hsieh* and Sheng-Yao Wang, FLUID FLOW AND COMBUSTION CHARACTERISTICS OF TRIANGULAR ROTARY ENGINES WITH PORT CONFIGURATION DESIGNS, 18th International Conference on Energy Sustainability, Jul. 15-17, 2024, USA美國 |
| 2024 | Chiu-Fan Hsieh*, Yu-Ji Cao, Yi-Hao Lin and Sheng-Yao Wang, FLUID FLOW CHARACTERISTICS OF TWIN AND GEROTOR SCREW COMPRESSORS, Proceedings of the ASME 2024 Engineering Division Summer Meeting, Jul. 15-17, 2024, USA美國 |
| 2023 | 謝秋帆*﹐ 沈哲宇 ﹐ 許哲恩, 波產生器之設計對諧波減速機之動力影響, 第 26 屆全國機構與機器設計學術研討會, Oct. 27, 2023, TWN臺灣 |
| 2021 | 月牙型液壓泵浦之設計與流體分析, 中國機械工程學會第三十八屆全國學術研討, Dec. 03-04, 2021, TWN中華民國(臺灣) |
| 2021 | 盤式與立式成型铣齒對外齒輪幾何精度誤差之 影響, 中華民國力學學會年會暨第四十五屆全國力學會議, Nov. 18-19, 2021, TWN中華民國(臺灣) |
| 2021 | 具十字滑塊之傳動設計對擺線式減速機之動力影響, 第24屆全國機構與機器設計學術研討會, Oct. 29, 2021, TWN中華民國(臺灣) |
| 2020 | 雙螺桿壓縮機之設計對流體流動 特性之影響, 中國機械工程學會第三十七屆全國學術研討會, Nov. 20-21, 2020, TWN中華民國(臺灣) |
| 2019 | 謝秋帆、尤俊智、黃柏勛 , 八速齒輪變速箱之設計與動力分析 , 中國機械工程學會第三十六屆全國學術研討會, Dec. 07-08, 2019, TWN中華民國(臺灣) |
| 2019 | 謝秋帆、陳冠廷、曹育吉 , 三角轉子引擎之三維流場特性與洩漏分析 , 中國機械工程學會第三十六屆全國學術研討會, Dec. 07-08, 2019, TWN中華民國(臺灣) |
| 2019 | 謝秋帆 、許哲豪 、曹育吉 , 離心室形狀設計對離心泵浦的流體特性影響 , 中華民國力學學會第四十三屆全國力學會議, Nov. 29-30, 2019, TWN中華民國(臺灣) |
| 2019 | 謝秋帆 、蘇揚凱 、黃柏勛, 轉子式壓縮機之流場特性分析, 中華民國力學學會第四十三屆全國力學會議, Nov. 29-30, 2019, TWN中華民國(臺灣) |
| 2015 | Chiu-Fan Hsieh, Wen-Huang Lin, You-Qing Zhu, Ching-Sheng Liu, Influence of Seat Height and Crank Rotation Speed on Biomechanics of Cyclist’s Leg Bones, 2015 IFToMM World Congress, Oct. 25-30, 2015, TWN中華民國(臺灣) |
| 2015 | Chiu-Fan Hsieh, Wen-Huang Lin, Jia-Sian Chen, Predicting the Biomechanics Effects on the Human Arm of the Badminton Forehand Smash, 2015 IFToMM World Congress, Oct. 25-30, 2015, TWN中華民國(臺灣) |
| 2015 | Chiu-Fan Hsieh, Flow Characteristics of External Gear Pumps with and without Relief Grooves, 13th Asian International Conference on Fluid Machinery, Sep. 07-10, 2015, JPN日本 |
| 2014 | 謝秋帆 , 謝堯明, 多階設計對新型減速機之動力影響, 中國機械工程學會第三十一屆全國學術研討會, Dec. 06-07, 2014, TWN中華民國(臺灣) |
| 2014 | 謝秋帆 , 朱祐慶, 齒形設計參數對直齒傘齒輪之動力影響程度分析, 中國機械工程學會第三十一屆全國學術研討會, Dec. 06-07, 2014, TWN中華民國(臺灣) |
| 2014 | 謝秋帆 , 鄭浩羽, 外齒輪泵之流場分析研究, 中華民國力學學會第三十八屆全國力學會議, Nov. 21-22, 2014, TWN中華民國(臺灣) |
| 2014 | 謝秋帆 , 許哲豪, 喉管高度對離心泵浦的流體特性影響, 中華民國力學學會第三十八屆全國力學會議, Nov. 21-22, 2014, TWN中華民國(臺灣) |
| 2014 | 謝秋帆 , 簡文檄, 傳統二階與RV減速機之傳動差異分析, 第十七屆全國機構與機器設計學術研討會, Nov. 14, 2014, TWN中華民國(臺灣) |
| 2014 | 謝秋帆 , 朱祐慶, 騎乘腳踏車運動之腿部生物力學分析, 第十七屆全國機構與機器設計學術研討會, Nov. 14, 2014, TWN中華民國(臺灣) |
| 2014 | 謝秋帆 , 江岳勳、林佳樺, 人體骨骼之逆向工程研究, 第二屆台灣塑性加工研討會, Nov. 07, 2014, TWN中華民國(臺灣) |
| 2014 | 謝秋帆 ,陳富乾、黃乾龍, 三角轉子之逆向工程研究, 第二屆台灣塑性加工研討會, Nov. 07, 2014, TWN中華民國(臺灣) |
| 2014 | Chiu-Fan Hsieh, Qin-Jie Zhou, Flow Characteristics of Cylindrical and Screw Type Root Pumps, 7th Vacuum and Surface Sciences Conference of Asia and Australia 2014, Oct. 05-09, 2014, TWN中華民國(臺灣) |
| 2014 | Chiu-Fan Hsieh, Wun-Si Jian, Dynamics Analysis of Cycloidal Speed Reducers with Two-Stage Design, Asia-Pacific Symposium on Applied Electrics and Mechanics 2014, Jul. 23-25, 2014, TWN中華民國(臺灣) |
| 2013 | 離心泵浦之流場分析研究, 中國機械工程協會第30屆全國學術研討會議, Dec. 06-07, 2013, TWN中華民國(臺灣) |
| 2013 | 鏈輪的結構設計與強度分析, 中國機械工程協會第30屆全國學術研討會議 , Dec. 06-07, 2013, TWN中華民國(臺灣) |
| 2013 | 不同的運動條件對差速器之動力影響, 中國機械工程協會第30屆全國學術研討會議, Dec. 06-07, 2013, TWN中華民國(臺灣) |
| 2013 | Study On Flow Characteristics of Roots Pumps, The 1st International Conference on Mechanics (1st-ICM), Nov. 08-09, 2013, TWN中華民國(臺灣) |
| 2013 | Mechanism Design and Analysis of the Dual-rotor engine, The 1st International Conference on Mechanics (1st-ICM), Nov. 08-09, 2013, TWN中華民國(臺灣) |
| 2013 | 自行車後變速之雙鍊條式結構概念設計, 第16屆全國機構與機器設計學術研討會, Nov. 01, 2013, TWN中華民國(臺灣) |
| 2013 | 相位差設計對減速機之動力影響, 第16屆全國機構與機器設計學術研討會, Nov. 01, 2013, TWN中華民國(臺灣) |
| 2013 | 兩齒差擺線減速機之改良設計與分析, 第16屆全國機構與機器設計學術研討會, Nov. 01, 2013, TWN中華民國(臺灣) |
| 2013 | 多級魯式泵浦之流場分析研究, 台灣真空學會2013年度論文發表會, Oct. 25-26, 2013, TWN中華民國(臺灣) |
| 2013 | 魯式泵浦之轉子間隙預留量研究與分析, 台灣真空學會2013年度論文發表會, Oct. 25-26, 2013, TWN中華民國(臺灣) |
| 2013 | Dynamic Property of the Triangle Rotary Engine Mechanism, ECCOMAS Multibody Dynamics, Jul. 01-04, 2013, HRV克羅埃西亞共和國 |
| 2012 | 齒型參數設計對擺線減速機之運動影響, 中國機械工程學會第二十九屆學術研討會, Dec. 07-08, 2012, TWN中華民國(臺灣) |
| 2012 | 多階三角轉子引擎之設計與運動分析, 中國機械工程學會第二十九屆學術研討會, Dec. 07-08, 2012, TWN中華民國(臺灣) |
| 2012 | 設計參數對渦輪排風機之熱流分析影響, 中華民國力學學會第三十六屆全國力學會議, Nov. 16-17, 2012, TWN中華民國(臺灣) |
| 2012 | 離心泵浦葉輪設計與流體分析, 中華民國力學學會第三十六屆全國力學會議, Nov. 16-17, 2012, TWN中華民國(臺灣) |
| 2012 | 自行車傳動系統之運動分析研究, 中華民國力學學會第三十六屆全國力學會議, Nov. 16-17, 2012, TWN中華民國(臺灣) |
| 2012 | 漸開線齒型參數對軸承減速機之運動影響, 第十五屆全國機構與機器設計學術研討會, Nov. 02, 2012, TWN中華民國(臺灣) |
| 2012 | 直齒傘齒輪之運動分析研究, 第十五屆全國機構與機器設計學術研討會, Nov. 02, 2012, TWN中華民國(臺灣) |
| 2011 | 輸出銷設計對擺線減速機之運動影響, 中國機械工程學會第二十八屆學術研討會, Dec. 10-11, 2011 |
| 2011 | 雙轉子引擎之設計與運動分析, 中國機械工程學會第二十八屆學術研討會, Dec. 10-11, 2011 |
| 2011 | 差速器之動態與結構分析, 中華民國力學學會年會暨第35屆全國力學會議, Nov. 18-19, 2011 |
| 2011 | 具變導程螺桿之轉向機構設計與分析, 中華民國力學學會年會暨第35屆全國力學會議, Nov. 18-19, 2011 |
| 2011 | 軸承減速機之設計與分析研究, 第十四屆全國機構與機器設計學術研討會, Nov. 04, 2011 |
| 2011 | 轉位係數對漸開線行星減速器之運動影響, 第十四屆全國機構與機器設計學術研討會, Nov. 04, 2011 |
| 2011 | 魯式泵浦之流體分析, 第18屆全國計算流體力學, Aug. 03, 2011 |
| 2011 | 內齒輪式泵浦之流體分析, 第18屆全國計算流體力學, Aug. 03, 2011 |
| 2010 | 具曲面設計之擺線減速機運動與結構分析, 第十三屆全國機構與機器設計學術研討會, Oct. 22, 2010, TWN中華民國(臺灣) |
| 2009 | 食品級離心式泵浦之離心室設計與流體分析, 中國機械工程學會第二十六屆學術研討會, Nov. 20-21, 2009 |
| 2009 | 渦輪排風機之葉片設計與熱流分析, 中國機械工程學會第二十六屆學術研討會, Nov. 20-21, 2009 |
| 2009 | 壓力角對漸開線行星齒輪減速器之性能影響研究, 中華民國力學學會年會暨第33屆全國力學會議, Nov. 13-14, 2009 |
| 2009 | 爪式真空泵浦之流體分析, 中華民國力學學會年會暨第33屆全國力學會議, Nov. 13-14, 2009 |
| 2009 | 子引擎之密封片動態特性模擬與分析, 中華民國力學學會年會暨第33屆全國力學會議, Nov. 13-14, 2009 |
| 2009 | 具斜角設計擺線減速機之運動及結構分析, 第十二屆全國機構與機器設計學術研討會, Nov. 06, 2009 |
| 2009 | 食品級迴轉式泵浦之設計與流體分析, 第十二屆全國機構與機器設計學術研討會, Nov. 06, 2009 |
| 2008 | 具負載下關節型機械手臂於運動間之應力分析研究, 第二屆海峽兩岸科技與人文教育暨產學合作研討會, Dec. 04-05, 2008 |
| 2008 | 擺齒泵之流體特性分析, 第二屆海峽兩岸科技與人文教育暨產學合作研討會, Dec. 04-05, 2008 |
| 2008 | 關節型機械手臂運動分析與探討, 中國機械工程學會第二十五屆學術研討會, Nov. 21-22, 2008 |
| 2008 | 擺齒泵之密閉性與接觸應力大小評估方法研究, 中國機械工程學會第二十五屆學術研討會, Nov. 21-22, 2008 |
| 2008 | 簡易平面3R機械手臂電腦輔助運動模擬, 第十一屆全國機構與機器設計學術研討會, Nov. 14, 2008, TWN中華民國(臺灣) |
| 2008 | Study on the design of table mechanism with multi-degree of freedom, Global Congress on Manufacturing & Management (GCMM) 2008, Nov. 12-14, 2008, AUS澳大利亞 |
| 2008 | Generation and Sketching of Generalized Kinematic Chains, 2008 ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Aug. 03-06, 2008, USA美國 |
| 2007 | 爪式泵浦轉子幾何與近排氣口設計之研究, 中國機械工程學會第二十四屆學術研討會, Nov. 23-24, 2007 |
| 2022 | Chiu-Fan Hsieh, Hao-Yu Cheng. (2013). “Mechanism Design and Analysis of the Dual-rotor engine”. 37th National Conference on Theoretical and Applied Mechanics (37th NCTAM 2013) & The 1st International Conference on Mechanics (1st ICM). November 8-9. Hsinchu. Taiwan, Jan. 2022 |
| 2022 | Chiu-Fan Hsieh, Jhao-Wei Hong. (2013). “Study On Flow Characteristics of Roots Pumps”. 37th National Conference on Theoretical and Applied Mechanics (37th NCTAM 2013) & The 1st International Conference on Mechanics (1st ICM). November 8-9. Hsinchu. Taiwan., Jan. 2022 |
| 2022 | Chiu-Fan Hsieh, Qin-Jie Zhou (2014). “Flow Characteristics of Cylindrical and Screw Type Roots Pumps”, 7th Vacuum and Surface Sciences Conference of Asia and Australia, October 6, Hsinchu, Taiwan, Jan. 2022 |
| 2022 | Chiu-Fan Hsieh, Wun-Si Jian (2014). “Dynamics Analysis of Cycloidal Speed Reducers with Two-Stage Design”, 2014 Asia-Pacific Symposium on Applied Electrics and Mechanics, July 23-25, Taichung, Taiwan, Jan. 2022 |
| 2022 | Chiu-Fan Hsieh, Wen-Huang Lin, Jia-Sian Chen. (2015). “Predicting the Biomechanics Effects on the Human Arm of the Badminton Forehand Smash,” 2015 IFToMM World Congress, October 25-30, Taipei, Taiwan, Jan. 2022 |
| 2022 | Chiu-Fan Hsieh, Wen-Huang Lin, You-Qing Zhu, Ching-Sheng Liu. (2015). “Influence of Seat Height and Crank Rotation Speed on Biomechanics of Cyclist’s Leg Bones,” 2015 IFToMM World Congress, October 25-30, Taipei, Taiwan, Jan. 2022 |
| Project Category | Year | Project Title | Job Title | Period |
|---|---|---|---|---|
| 企業產學計畫(含公營及私人企業) | 2025 | ACS-產品結構模擬分析與產線場域規劃與建置 | 主持人 | 2025.12 ~ 2026.06 |
| 政府學術研究計畫-科技部專題研究計畫 | 2023 | 新型腔體輪廓設計對三角轉子引擎之性能影響 | 主持人 | 2023.08 ~ 2024.07 |
| 企業產學計畫(含公營及私人企業) | 2022 | ACS-諧波減速機齒形分析 | 主持人 | 2022.05 ~ 2022.06 |
| 其他單位產學計畫 | 2019 | 特定材料加工件之品質檢測 | 主持人 | 2019.11 ~ 2020.04 |
| 其他單位產學計畫 | 2019 | 圓形棒料尺寸與加工進給分析 | 主持人 | 2019.10 ~ 2020.02 |
| 政府學術研究計畫-科技部專題研究計畫 | 2019 | 科技部108年度 【 新型內嚙合螺桿式壓縮機之設計與性能分析 】 | 主持人 | 2019.08 ~ 2020.07 |
| 政府學術研究計畫-國科會專題研究計畫 | 2015 | 科技部104年度 【 月牙形液壓泵浦之創新設計與性能分析研究 】學門名稱：機構與傳動 | 主持人 | 2015.08 ~ 2016.07 |
| 政府學術研究計畫-國科會專題研究計畫 | 2014 | 科技部103年度 【 擺線液壓馬達之創新設計與性能分析研究 】(學門名稱：機構與傳動) | 主持人 | 2014.08 ~ 2015.07 |
| 企業產學計畫(含公營及私人企業) | 2014 | ACS-飛輪創新設計與性能分析 | 主持人 | 2014.07 ~ 2015.09 |
| 企業產學計畫(含公營及私人企業) | 2013 | ACS-飛輪設計對自行車傳動系統之動力影響|||產學處|||企業產學|||無|||無 | 主持人 | 2013.06 ~ 2014.06 |
| 政府學術研究計畫-國科會專題研究計畫 | 2012 | 國科會101年度 【 擺齒液壓泵之創新設計與性能分析研究 】 | 主持人 | 2012.08 ~ 2013.07 |
| 企業產學計畫(含公營及私人企業) | 2012 | ACS-自行車傳動系統之運動與強度分析模型建置 | 主持人 | 2012.05 ~ 2013.02 |
| 企業產學計畫(含公營及私人企業) | 2011 | 三擺線輪之減速機開發 | 主持人 | 2011.11 ~ 2012.04 |
| 政府產學計畫 | 2010 | 經濟部工業局智慧型機器人產業發展推動計畫-協助業界產品開發與商品化輔導案 | 主持人 | 2010.05 ~ 2010.12 |
| 政府學術研究計畫-國科會專題研究計畫 | 2009 | 液壓擺齒泵轉子齒形修整技術之研究 | 主持人 | 2009.08 ~ 2010.07 |
| 政府學術研究計畫-國科會專題研究計畫 | 2008 | 一齒差擺齒泵之齒廓設計與性能研究 | 主持人 | 2008.01 ~ 2008.07 |
| 企業產學計畫案(公營企業及私人企業，不含委訓計畫) | 2007 | 機械手臂之運動、結構分析 | 主持人 | 2007.12 ~ 2008.11 |
| Publish Date | Patent Title | Patent Number | Patent Country | Authors |
|---|---|---|---|---|
| 2021/02/11 | 齒輪變速機構 | I718664 | 國內 | 謝秋帆 |
| 2020/02/21 | 齒輪變速機構GEARVARIABLE-SPEEDMECHANISM | M591134 | 國內 | 謝秋帆 |
| Year | Award Name | Awarding Unit |
|---|---|---|
| 2022 | 入選2009who’s who in the word(世界名人錄) | |
| 2014 | 103年度產學合作以及輔導顧問績優獎 | 國立虎尾科技大學 |
| 2012 | 教育部產業先進設備人才培育計畫, 2012智慧化工具機專題實作競賽, 獲佳作. 作品名稱:高性能少齒差軸承減速器之開發 | 南台科大 |
| 2011 | 100年智慧型機器人產品創意競賽，獲產業應用組第三名; 作品名稱：擺線減速機應用於關節型機械手之設計與模擬 | 經濟部工業局 |
| 2009 | 2009年校慶學生科技專題製作競賽優良作品推薦獎 | 虎尾科技大學 |
| Year | Paper Title |
|---|---|
| 2023 | Design and Flow Field Characteristics Analysis of Two-Angle Rotors in Compressorsand Vacuum Pumps, 2023 |
| 2023 | The Influence of Rotary Engine Design on Fluid and Combustion Characteristics, 2023 |
| 2021 | The Influence of External Gear Manufacturing Method on its Geometric Accuracy Error, 2021 |
| 2020 | Design and Analysis of Harmonic Drive, 2020 |
| 2019 | Grinding Simulation and Deviation Analysis of Rotors Based on Grinding Wheel Dressing, 2019 |
| 2019 | Design and Flow Field Analysis of Claw Vacuum Pumps, 2019 |
| 2018 | Three-dimensional Flow Field Characteristics and Leakage Analysis of Rotor Engine, 2018 |
| You-Qing Zhu, Leg Biomechanical Analysis of Riding Bicycle | |
| Wun-Si Jian, Design and Dynamics Analysis of the Two-Stage Reducer | |
| Ching-Sheng Liu, Dynamic Effects on Speed Reducers using Different Component Designs | |
| Yung-Kia Sue, Design and Fluid Analysis of the Rotor Type Fluid Machinery | |
| Yu-Cheng Deng, Phase Design on Roots Pumps Effects of Fluid Properties | |
| Chun-Chih Yu, Design and Dynamic Analysis of Gearbox | |
| Qin-Jie Zhou, Development of Design and Analysis Model of the Roots Pump | |
| Ming-De Lin, The Design and Analysis of Chains and Sprocrets | |
| Jhao-Wei Hong, Fluid Analysis of Roots Pump | |
| Sheng-Long Lyu, Motion Analysis of Differentials in Different Dynamic Conditions | |
| Chong-Yu Hsu, Mechanism Design and Analysis of the Wankel Engine | |
| Yao-Ming Sie, Design and Motion Analysis of the Involute Bearing Reducer | |
| Jyun-Yan Huang, Design and Motion Analysis of Two Teeth DifferenceCycloid Reducer | |
| Hao-Yu Cheng, Design and Analysis of the Rotor Type Fluid Machinery | |
| Jia-Sian Chen, Modeling of The Human Skeleton and Biomechanical Analysis | |
| Jhe-Hao Syu, Fluid Analysis of Centrifugal Pump | |
| Chi-Jun Huang, Flow Field Analysis and Research of Centrifugal (Vertical Axis) Pumps | |
| Hung-Wei Chen, Motion and Strength Analysis of Involute Speed Reducers | |
| Jia-Sin Lin, Design and Analysis of a Bearing Speed Reducer | |
| Yi-Fong Lin, Motion and Structure Analysis of Cycloidal Speed Reducer with Skew Angle Design |
| Service Name | Service Type | Service Unit | Participation Status | Area | Service Start Date | Service End Date |
|---|---|---|---|---|---|---|
| Guest Editor | 擔任國內專業期刊編審及評審 | Journal: Applied Sciences | 2024-11-01 | |||
| Guest Editor of Special Issue | 擔任國外專業期刊編審及評審 | Energies (SCI) | 2021-11-01 | |||
| 其他 | 機械與電腦輔助工程系 | 2011-03-01 | 2011-03-02 | |||
| 其他 | 機械與電腦輔助工程系 | 2010-03-01 | 2010-03-02 | |||
| 其他 | 機械與電腦輔助工程系 | 2010-09-01 | 2010-09-02 | |||
| 其他 | 機電輔系 | 2009-08-01 | 2010-01-31 | |||
| 其他 | 機電輔系 | 2009-08-01 | 2010-01-01 | |||
| 其他 | 機電輔系 | 2009-08-01 | 2010-01-31 | |||
| 其他 | 虎科大機械與電腦輔助工程系 | 2009-03-01 | 2009-03-02 | |||
| 其他 | 機電輔系 | 2009-08-01 | 2010-01-31 | |||
| 其他 | 虎科大機械與電腦輔助工程系 | 2008-08-01 | ||||
| 其他 | 虎科大機械與電腦輔助工程系 | 2008-02-01 | ||||
| 其他 | 虎科大機械與電腦輔助工程系 | 2008-02-01 | ||||
| 其他 | 虎科大機械與電腦輔助工程系 | 2008-08-01 | ||||
| 其他 | 虎科大機械與電腦輔助工程系 | 2008-08-01 | ||||
| 其他 | 虎科大機械與電腦輔助工程系 | 2008-08-01 | ||||
| 其他 | 虎科大機械與電腦輔助工程系 | 2008-08-01 | ||||
| 其他 | 虎科大機械與電腦輔助工程系 | 2008-08-01 | ||||
| 擔任國外專業期刊編審及評審 | Journal of Energies (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Advances in Mechanical Engineering (SCI) | |||||
| 擔任國外專業期刊編審及評審 | IMeche, Part C：Journal of Mechanical Engineering Science (SCI) | |||||
| 擔任國外專業期刊編審及評審 | International Journal of Nonlinear Sciences and Numerical Simulation (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Mechanism and Machine Theory (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Mechanism and Machine Theory (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Mechanism and Machine Theory (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Mechanism and Machine Theory (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Mechanism and Machine Theory (SCI) | |||||
| 擔任國外專業期刊編審及評審 | ASME, Journal of Mechanical Design (SCI) | |||||
| 擔任國外專業期刊編審及評審 | ASME, Journal of Mechanical Design (SCI) | |||||
| 擔任國外專業期刊編審及評審 | ASME, Journal of Mechanical Design (SCI) | |||||
| 擔任國外專業期刊編審及評審 | ASME, Journal of Mechanical Design (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Shock and Vibration (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Vacuum (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Vacuum (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Vacuum (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Transactions of the Canadian Society for Mechanical Engineering (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Symmetry (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Vacuum (SCI) | |||||
| 擔任國外專業期刊編審及評審 | IMeche, Part D：Journal of Automobile Engineering (SCI) | |||||
| 擔任國外專業期刊編審及評審 | IMeche, Part C：Journal of Mechanical Engineering Science (SCI) | |||||
| 擔任國外專業期刊編審及評審 | IMeche, Part D：Journal of Automobile Engineering (SCI) | |||||
| 擔任國外專業期刊編審及評審 | IMeche, Part C：Journal of Mechanical Engineering Science (SCI) | |||||
| 擔任國外專業期刊編審及評審 | IMeche, Part C：Journal of Mechanical Engineering Science (SCI) | |||||
| 擔任國外專業期刊編審及評審 | IMeche, Part C：Journal of Mechanical Engineering Science (SCI) | |||||
| 擔任國內專業期刊編審及評審 | IMeche, Part C：Journal of Mechanical Engineering Science (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Machines | |||||
| 擔任國外專業期刊編審及評審 | IEEE Access (SCI) | |||||
| 擔任國外專業期刊編審及評審 | IEEE Access (SCI) | |||||
| 擔任國內專業期刊編審及評審 | Journal of the Chinese Institute of Engineers (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Energies (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Advanced Composites Letters (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Energies (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Energies (SCI) | |||||
| 擔任國外專業期刊編審及評審 | International Journal of Nonlinear Sciences and Numerical Simulation (SCI) | |||||
| 擔任國外專業期刊編審及評審 | ASME, Journal of Applied Mechanics (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Journal of the Brazilian Society of Mechanical Sciences and Engineering (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Journal of the Brazilian Society of Mechanical Sciences and Engineering (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Mechanical Systems and Signal Processing (SCI) | |||||
| 擔任國外專業期刊編審及評審 | Mechanism and Machine Theory (SCI) |
| Activity Name | Activity Type | Organizer | Participation Status | Area | Start Date | End Date |
|---|---|---|---|---|---|---|
| An Overview of the Main Ideas for Presenters Research Work for the Following Five to Eight Years | 專題 | Rochester Institute of Technology | 參加 | 2018-03-22 | 2018-03-22 |
| Course Title | Class | Reference Link |
|---|---|---|
| 機械設計(一) | 夜四機電輔三甲 | https://tqas.nfu.edu.tw/course_schedule/detail/11517682 |
| 機械設計(一) | 四機電輔三乙 | https://tqas.nfu.edu.tw/course_schedule/detail/11512553 |
| 機械設計(一) | 四機電輔三甲 | https://tqas.nfu.edu.tw/course_schedule/detail/11512539 |
| 創意性工程設計 | 碩機電輔一甲 | https://tqas.nfu.edu.tw/course_schedule/detail/11510012 |