| Name | Chang Nai-Wen |
|---|---|
| Job Title | Assistant Professor |
| Tel | +886-5-631-5317 |
| Fax | +886-5-631-5310 |
| Job | Assistant Professor, Department of Mechanical and Computer-Aided Engineering |
| Expertise | Coating Technology, Semiconductor Manufacturing, Material Analysis, Polymer Processing, Additive Manufacturing |
| Courses | ◎Materials Science ◎Fluid Power and Practice ◎Mechatronics Integration and Practice |
| Education | Ph.D. in Mechanical Engineering, National Taiwan University |
| Experience | ◎Assistant Professor, Department of Mechanical and Computer-Aided Engineering, National Formosa University (NFU), Jan. 2025 ~ Present ◎Senior Engineer, Raydium Photonics Corp. ◎Postdoctoral Researcher, Institute of Mechanical Engineering, National Cheng Kung University (NCKU) ◎Additive Manufacturing Engineer, Industrial Technology Research Institute (ITRI) |
| Banner |  |
| Year | Paper Title |
|---|---|
| 2019 | N.W, Chang, K.C, Ke, and S.Y, Yang,” Fabrication of a light-intensity-enhancement component by using computer-controlled ultraviolet curing and air-pressing imprinting,” Microsyst Technol. (2019) 31–37. IF: 1.513, Jan. 2019 |
| 2018 | P. C, Kuo., N. W, Chang, Y, Suen, and S.Y, Yang. “Fabrication of Biomimetic Dry-Adhesion Structures through Nanosphere Lithography.” Applied Physics A 124, no. 3 (March 1, 2018): 236. https://doi.org/10.1007/s00339-018-1639-9. IF: 1.694, Jan. 2018 |
| 2018 | Y.H, Lee, K,C, Ke, N,W, Chang, and S,Y, Yang. “Development of an UV Rolling System for Fabrication of Micro/Nano Structure on Polymeric Films Using a Gas-Roller-Sustained Seamless PDMS Mold.”, Microsystem Technologies, January 2, 2018, 1–8. IF: 1.513, Jan. 2018 |
| 2017 | N.W, Chang, C.H, Yang, and S.Y, Yang, ”Double-sided UV roller imprinting of microstructures on transparent plates”, Microsystem Technologies, December 2017, Volume 23, Issue 12, pp 5833–5839 . IF: 1.513, Jan. 2017 |
| 2011 | C.K, Chung, T.S, Chen, N.W, Chang, Liao, M.W, & C.T, Lee. “Effect of annealing temperature on the microstructure and photoluminescence of low resistivity Si/SiN/TaN thin films using magnetron sputtering. Thin Solid Films, 2011,520(5), 1460–1463. doi:10.1016/j.tsf.2011.07.061, Jan. 2011 |
| 2011 | C.K, Chung, T.S, Chen, and N.W, Chang, “Effect of reactive gases flow ratios on the microstructure and electrical resistivity of Ta–N–O thin films by reactive co-sputtering,” Thin Solid Films, vol. 519, no. 15, pp. 5099–5102, May 2011. IF: 1.939, Jan. 2011 |
| 2010 | C.K, Chung, T.S, Chen, N. W., Chang, S.C, Chang, & M.W, Liao, ”Oxidation resistance and mechanical property of cosputtered quasi-amorphous Ta–Si–N films under vacuum rapid thermal annealing. Surface and Coatings Technology, 2010.205(5), 1268–1272. doi:10.1016/j.surfcoat. 08.080, Jan. 2010 |
| 2009 | C. K. Chung, T.S. Chen, A. Nautiyal, N.W. Chang, and S T. Hung, “Effect of the target shuttering on the characteristics of the Ta–Si–N thin films by reactive magnetron co-sputtering,” Surface and Coatings Technology, vol. 204, no. 6–7, pp. 1071–1075, Dec. 2009. IF: 1.939, Jan. 2009 |
| Year | Paper Title |
|---|---|
| 2016 | Nai-Wen Chang, Kun-Cheng Ke and Sen-Yeu “UV Roller Imprinting of Microstructures on Double-sided Transparent Plates” JSPS-DST Asian Academic Seminar December 14 - 20, Japan (2016), Jan. 2016 |
| 2016 | Sen-Yeu Yang, Kun-Cheng Ke and Nai-Wen Chang, ”Hot Embossing for Replication of Microstructures onto Polymeric Substrates with Uniform Pressure and Rapid Heating”, Asia Academic Seminar , Dec 14-21,Tokyo, Japan(2016), Jan. 2016 |
| 2014 | Wei-Chun Lin, Nai-Wen Chang and Sen-Yeu Yang, “Roller-type UV Imprint Lithography to Fabricate Patterned Sapphire Substrate”, The 27th International Microprocesses and Nanotechnology Conference (MNC 2014), Jan. 2014 |
| 2014 | Nai-Wen Chang, Cheng-Huan Yang and Sen-Yeu Yang, “High-precision double-sided microstructures fabricated using the efficient side-emitting UV-curing air-bearing assisted roll-to-roll imprinting technique” The fouth Asia Pacific Conference on Optics Manufacture (APCOM 2014), Jan. 2014 |
| 2013 | Kai-Yi Hsiao, Rong-Hong Hong, Nai-Wen Chang and Sen-Yeu Yang*,"Fabrication of Hydrophobic Microchannel by Gas-Assisted Thermoforming Process Using Anodic Aluminum Oxidation Mold", 26th International Microprocesses and Nanotechnology Conference (MNC2013), Nov. 5-8, Sapporo, Hokkaido, Japan, Jan. 2013 |
| 2012 | Yu-Yuan Huang, Cheng-Huan Yang, Nai-Wen Chang and Sen-Yeu Yang, "The Gasbag-assisted Side-emitting UV-curing Imprinting Process for Large-area replication of Microstructures", 25th International Microprocesses and Nanotechnology Conference (MNC), Oct.30 - Nov. 2 2012, Kobe, Japan., Jan. 2012 |
| Year | Award Name | Awarding Unit |
|---|---|---|
| 2017 | 年度:2017 /獎項名稱:塑膠材料應用及技術論文競賽第二名 /頒獎單位:國際塑膠工程師協會 | |
| 2017 | 年度:2017 /獎項名稱:模具論文傑出獎 /頒獎單位:模具技應用產業技術論文發表會 | |
| 2017 | 年度:2017 /獎項名稱:Best Poster Paper Award /頒獎單位:International Conference of the polymer processing society |